Preparation of a 99mTc-labeled graft polymer and its in vitro and in vivo evaluation

Journal of Radioanalytical and Nuclear Chemistry - The aim of this study is the synthesis of a novel 99mTc-labeld graft polymer and the biological evaluation of its in vitro and in vivo properties....     

New Methacrylate Copolymers Based on the Benzofurane Ring: Synthesis,Characterization, Monomer Reactivity Ratios and Biological Activity

The free radical copolymerization of (5-bromo-1-Benzofuran-2-yl)(phenyl)-O-methacrylketoxime (BPMKO) with 2-(4-acetylphenoxy)-2-oxoethyl-2-methylacrylate(AOEMA) has been carried out in 1, 4-dioxane at 65°C ± 1 and was analyzed by Fourier transform infrared, ¹H-NMR, ¹³C-NMR and gel permeation chromatography. Elemental analysis was used to determine the molar fractions of BPMKO and AOEMA in the copolymers. The monomer–reactivity ratios were calculated according to the general copolymerization equation using Kelen-Tüdõs and Finemann-Ross linearization methods. The reactivity ratios indicated a tendency toward random copolymerization. The polydispersity indices of the polymers were determined by gel permeation chromatography and suggested a strong tendency for chain termination by disproportionation. The thermal behaviors of copolymers with various compositions were investigated by differential scanning calorimetry and thermogravimetric analysis. The glass-transition temperature of the copolymers increased with increasing BPMKO content in the copolymers. All the products showed moderate activity against different strains of bacteria and fungi.     

Mathematical models for job-shop scheduling problems with routing and process plan flexibility

As a result of rapid developments in production technologies in recent years, flexible job-shop scheduling problems have become increasingly significant. This paper deals with two NP-hard optimization problems: flexible job-shop scheduling problems (FJSPs) that encompass routing and sequencing sub-problems, and the FJSPs with process plan flexibility (FJSP-PPFs) that additionally include the process plan selection sub-problem. The study is carried out in two steps. In the first step, a mixed-integer linear programming model (MILP-1) is developed for FJSPs and compared to an alternative model in the literature (Model F) in terms of computational efficiency. In the second step, one other mixed-integer linear programming model, a modification of MILP-1, for the FJSP-PPFs is presented along with its computational results on hypothetically generated test problems.     

Investigation of Cs(I) adsorption on densely crosslinked poly(sodium methacrylate) from aqueous solutions

In this study, a crosslinked copolymer bearing sodium methacrylate functional groups has been proposed to remove Cs(I) ions from aqueous solutions. For this purpose, the crosslinked copolymer of ethylene glycol dimethacrylate (EGDM) and methacrylic acid (MA) containing 25% MA as weight percentage was synthesized by using benzoyl peroxide (BPO)-N,N-dimethyl aniline initiator system. The available carboxyl groups in copolymer were converted to the groups of sodium methacrylate using 2 N NaOH. The adsorption behavior of cesium ions on the densely crosslinked poly(sodium methacrylate) from aqueous solutions were investigated by the technique of ICP-MS measurements of cesium ions in solutions. Batch adsorption method was used to analyze the Cs(I) adsorption as a function of parameters such as the amount of adsorbent, contact time, pH of solution, initial Cs(I) concentration and temperature. The adsorption data were evaluated by the Freundlich, Langmuir and Dubinin–Radushkevich (D–R) isotherms. The adsorption capacity and free energy change were calculated by using D–R isotherm. The adsorption data obtained from experimental results have been tested by the fractional power, the Elovich, the pseudo-first order and the pseudo-second order kinetic models.     

Deposition and characterization of layer-by-layer sputtered AgGaSe2 thin films

Sputtering technique has been used for the deposition of AgGaSe₂ thin films onto soda-lime glass substrates using sequential layer-by-layer deposition of GaSe and Ag thin films. The analysis of energy dispersive analysis of X-ray (EDXA) indicated a Ga-rich composition for as-grown samples and there was a pronounce effect of post-annealing on chemical composition of AgGaSe₂ thin film. X-ray diffraction (XRD) measurements revealed that Ag metallic phase exists in the amorphous AgGaSe₂ structure up to annealing temperature 450 °C and then the structure turned to the single phase AgGaSe₂ with the preferred orientation along (1 1 2) direction with the annealing temperature at 600 °C. The surface morphology of the samples was analyzed by scanning electron microscopy (SEM) measurements. The structural parameters related to chalcopyrite compounds have been calculated. Optical properties of AgGaSe₂ thin films were studied by carrying out transmittance and reflectance measurements in the wavelength range of 325-1100 nm at room temperature. The absorption coefficient and the band gap values for as-grown and annealed samples were evaluated as 1.55 and 1.77 eV, respectively. The crystal-field and spin-orbit splitting levels were resolved. These levels (2.03 and 2.30 eV) were also detected from the photoresponse measurements almost at the same energy values. As a result of the temperature dependent resistivity and mobility measurements in the temperature range of 100-430 K, it was found that the decrease in mobility and the increase in carrier concentration following to the increasing annealing temperature attributed to the structural defects (tetragonal distortion, vacancies and interstitials).     

Synthesis and characterization of a methacrylate polymer with side chain ketone and its derivatives

A new type of methacrylate monomer,2-(4-benzoylphenoxy)-2-oxoethyl methylacrylate(BOEMA) was synthesized.The radical homopolymerization of BOEMA was performed at 65℃in a 1,4-dioxane solution with benzoyl peroxide as an initiator.The oxime and thiosemicarbazone derivatives of poly[2-(4-benzoylphenoxy)-2-oxoethyl methylacrylate]poly(BOEMA) were prepared with hydroxylamine hydrochloride,and thiosemicarbazone hydrochloride, respectively.The monomer and its homopolymer were characterized with Fourier transform infrared and NMR techniques. The thermal stabilities of poly(BOEMA) and its derivatives were investigated with thermogravimetric analysis and differential scanning calorimetry.The ultraviolet stability of the polymers was compared.The antibacterial and antifungal effects of the monomer and the polymer and its derivatives were also investigated on various bacteria and fungi.The activation energies of the thermal degradation of the polymers were calculated with the Ozawa and Kissinger methods.     

Lyotropic Liquid Crystal to Soft Mesocrystal Transformation in Hydrated Salt–Surfactant Mixtures

Hydrated CaCl₂, LiI, and MgCl₂ salts induce self‐assembly in nonionic surfactants (such as C₁₂H₂₅(OCH₂CH₂)₁₀OH) to form lyotropic liquid‐crystalline (LLC) mesophases that undergo a phase transition to a new type of soft mesocrystal (SMC) under ambient conditions. The SMC samples can be obtained by aging the LLC samples, which were prepared as thin films by spin‐coating, dip‐coating, or drop‐casting of a clear homogenized solution of water, salt, and surfactant over a substrate surface. The LLC mesophase exists up to a salt/surfactant mole ratio of 8, 10, and 4 (corresponding to 59, 68, and 40 wt % salt/surfactant) in the CaCl₂, LiI, and MgCl₂ mesophases, respectively. The SMC phase can transform back to a LLC mesophase at a higher relative humidity. The phase transformations have been monitored using powder X‐ray diffraction (PXRD), polarized optical microscopy (POM), and FTIR techniques. The LLC mesophases only diffract at small angles, but the SMCs diffract at both small and wide angles. The broad surfactant features in the FTIR spectra of the LLC mesophases become sharp and well resolved upon SMC formation. The unit cell of the mesophases expands upon SMC transformation, in which the expansion is largest in the MgCl₂ and smallest in the CaCl₂ systems. The POM images of the SMCs display birefringent textures with well‐defined edges, similar to crystals. However, the surface of the crystals is highly patterned, like buckling patterns, which indicates that these crystals are quite soft. This unusual phase behavior could be beneficial in designing new soft materials in the fields of phase‐changing materials and mesostructured materials, and it demonstrates the richness of the phase behavior in the salt–surfactant mesophases.